Beautify landscaping can take many different forms in order to take a rather plain looking yard and turn it into something spectacular. A popular way is to install some sort of water display. With a pondless waterfall kit, you can do just that. Built correctly, you end up with a natural looking fall and stream that recycles the water for continuous pleasure.
Start the project by deciding where you want it. With this design, you want to include the entire flow so you can plan correctly and have a gravity fed stream. After having the utility company mark any lines, you should use bright spray paint to mark the bottom, where the pump will sit. Also, mark or get an idea of where the top of the fall will be and mark it as well.
Start digging out the reservoir and move the dirt to the area that the spillway will sit. As you dig, the reservoir should be square or round and about two feet deep. In the middle of it, you need to dig another 6 to 8 inches to place the vault that will hold the pump. Using a vault keeps the pump from getting damaged and allows it to sit at the lowest point of the reservoir.
Using rubber liner, you will protect the ground where the water will flow. You want to cover the entire reservoir and where the stream will be. Once this is covered, place the vault in the hole. Using more than one layer of the liner will be helpful in protecting it from getting poked by the rocks and keeping the water from draining out into the yard.
Run the flexible tubing to the top of the fall. You may want to dig a trench, but you can easily use the leftover dirt to cover it with several inches without digging a trench. Keep it uncovered until the last step. It will be attached to the spillway at the top to create a circulating water system.
Use bigger gravel in the bottom and begin filling in the reservoir. Dirt and sand can wash away and become saturated. The rocks will hold everything in place. As you build it up, begin adding larger rocks, even boulder size, for decoration. You will begin placing them along the path of the stream up to the spillway.
The path should be lined with the larger boulders. As this is done, the stream will follow the path to the reservoir. When the boulders are in place, you can use peat gravel and other rocks to create the scene. Before you are done, attach the pump and fill the stream with water to make sure everything is flowing where it needs to go. You may have to make adjustments to keep water in the system and out of the yard.
When set, start filing in around the stream and use the dirt to cover the flex tubing. The dirt can also be used to cover the extra lining that will be around the entire system. With a few inches of dirt, you can plant flowers or other objects to help create a more natural looking system. Larger rocks make the scene look more natural than filling in the stream with tiny pebbles. Using various sizes will help with the looks.
Start the project by deciding where you want it. With this design, you want to include the entire flow so you can plan correctly and have a gravity fed stream. After having the utility company mark any lines, you should use bright spray paint to mark the bottom, where the pump will sit. Also, mark or get an idea of where the top of the fall will be and mark it as well.
Start digging out the reservoir and move the dirt to the area that the spillway will sit. As you dig, the reservoir should be square or round and about two feet deep. In the middle of it, you need to dig another 6 to 8 inches to place the vault that will hold the pump. Using a vault keeps the pump from getting damaged and allows it to sit at the lowest point of the reservoir.
Using rubber liner, you will protect the ground where the water will flow. You want to cover the entire reservoir and where the stream will be. Once this is covered, place the vault in the hole. Using more than one layer of the liner will be helpful in protecting it from getting poked by the rocks and keeping the water from draining out into the yard.
Run the flexible tubing to the top of the fall. You may want to dig a trench, but you can easily use the leftover dirt to cover it with several inches without digging a trench. Keep it uncovered until the last step. It will be attached to the spillway at the top to create a circulating water system.
Use bigger gravel in the bottom and begin filling in the reservoir. Dirt and sand can wash away and become saturated. The rocks will hold everything in place. As you build it up, begin adding larger rocks, even boulder size, for decoration. You will begin placing them along the path of the stream up to the spillway.
The path should be lined with the larger boulders. As this is done, the stream will follow the path to the reservoir. When the boulders are in place, you can use peat gravel and other rocks to create the scene. Before you are done, attach the pump and fill the stream with water to make sure everything is flowing where it needs to go. You may have to make adjustments to keep water in the system and out of the yard.
When set, start filing in around the stream and use the dirt to cover the flex tubing. The dirt can also be used to cover the extra lining that will be around the entire system. With a few inches of dirt, you can plant flowers or other objects to help create a more natural looking system. Larger rocks make the scene look more natural than filling in the stream with tiny pebbles. Using various sizes will help with the looks.
About the Author:
Get a summary of the factors to consider when choosing a pondless waterfall kit supplier and more information about a reputable supplier at http://www.boulderfountain.com/pondless-waterfall.html now.
No comments:
Post a Comment